The castle is the most reliable and popular
design. Embedding the locking device on the iron door can only be
professional, but set it on a wooden door can be independently.
Place the lock to the inside of the door at
that level, where it will be embedded. Circle it along the contour with a
pencil and mark the location for future fixtures. You will need a markup
of the upper and lower edge of the body of the locking device, the height of
its stem and keyhole. Transfer touches the mark on the opposite side of
the door. Spend the center line on the middle of the door edge. Perform
measurement depth of the keyhole, and mark this distance on the drill. Choose
crimped or Perov drill bit with a diameter a little more than the thickness of
the lock mechanism. Drill holes in the overlapping center line marked on
the door edge. Work carefully, step by step drill, take care to drill kept
perpendicular position.
Tick on the front side of the door in the
place where must be perforated to handle and latch keyhole. Drill them on
both sides. Holes must come together in the middle. Align the side of
the nest for the lock case at the end of the door with a chisel. Remove
excess wood. BTW, you can buy the proximity door lock at Banggood. Besides, you
can easily get other electronic accessories (e.g. parallel rolling ruler, Nero portable) there with high quality and reasonable prices.
Check that the holes made by the same for
the latch and keyhole with the holes in the latch. To do this, insert the
lock body in place. Screw the cover screws of the lock case. Insert
the handle and its rod in place by tightening its screws. Move the door almost
closed position. Put a mark on the edge of the door frame top and bottom
latches. At the open door position, draw a line on the inner surface of
the frame, using a ruler and pencil. Measure the distance between the front
edge of the door and the front side of the latch. Circle the locking bolt
and the hole in her pencil and attach it to the prepared layouts. Cut a
slot for the latch chisel. Attach the strap and fasten it with screws
没有评论:
发表评论