How to Tighten the Screw

Even if you do not like tinkering and do something around the house with your own hands, you will sooner or later encounter the situation when you need to tighten the screw. Simple, it would seem, in some cases, surgery can cause a lot of trouble.

You will need

- Mini Screw driver;

- Spanner or wrench;

- Toilet seat screws;

- Spring and bracket;

- Rubber tube;

- Glue or paint.

Examine the head of the screw and pick the right tool for tightening. If there is a cutout hat, pick a Phillips or flathead screwdriver suitable diameter. Please note, if you take a screwdriver size too small, it will be scrolled. And too much can strip the threads.

If the head of the screw and is formed as a hexagon or square, pick up a suitable wrench, you can also use an adjustable wrench or, in extreme cases, pliers. In order to tighten the screw with one or two holes instead of slots, screw a Y- shaped screwdriver, the screw created for difficulty unscrewing, buy special tools. If you need a large number of screw fasteners, use the screwdriver or the attachment on a drill. In addition, you can purchase different attachments, including tightening the fasteners in tight spaces. BTW, you can select the special tools at Banggood. Besides, you can easily get other electrical accessories (e.g. plastical ligator clips) there with high quality and reasonable prices.

To tighten the screw in a place where it is impossible to get, use a screwdriver hinge. This screwdriver can be done by yourself, for this standard screwdriver Saw rod in half and welded to connect again with the end of spring. To screw did not have to hold his hand, put the screwdriver bracket with a spring. From the side of the handle, drill a hole in it Thread the pin and retighten it with the help of a spring. When you put the screw hole brackets, spring must firmly press it to the tip of a screwdriver.

You can do it even easier - get a rubber tube with an internal diameter slightly less than the diameter of the screw driver. Cut a piece of 3 cm and pull it tight at the business end of a screwdriver, insert the tube head screw and. Now you can work in any position, without the aid of the second hand.