How to Choose a Movie Camera

Movies shoot both film cameras and digital. Currently, the latter are gaining in popularity because it significantly reduces the price of production and have a lower cost. But you can remove your movie on amateur camera.

Based on the requirements of image quality and studio budget decide on how much you can spend on a movie camera. If you want to stay in one film and future plans you do not, then maybe you fit cameras for rent. Then you can choose a more advanced model.

If you have a small budget, then pay attention to digital cameras such as QQ6 Camera. These cameras have a video mode, and produce very high quality images, close to the film. Hire of such equipment is much cheaper camera RED ONE. For example, one of the series Doctor House was filmed on a camera.

If you're shooting a documentary, the bulky cameras with constantly changing optics you cannot come. Pay attention to the easy digital cameras, which record images in HD-format. In such a camera all settings must be adjusted manually. They are operated via buttons and rings. It is desirable that the camera has been out for connecting a microphone. BTW, you can select the full HD 1080P video camcorder camera at Banggood. Besides, you can easily get other camera accessories (e.g. camera screw adapter) there with high quality and reasonable prices.

USB Endoscope Banggood Sale

Video endoscope comprises a flexible probe equipped with a camera, and a control unit which can be equipped with a screen for displaying pictures or video. It is intended to detect defects and malfunctions difficult knots of the car without their dismantling. What does this mean literally?

Eventually, the work is done quickly, and all the necessary repair operations understood by the client, so it is always quiet. As a result, the reputation of the service is improved with her growing customer base and profits. That is why the camera endoscopes were so widespread in the field of auto repair. But here also we should remember that they found several varieties, the most popular and got a few. What type of very-very easy to use and why? Answer at once, without a moment for reflection – USB endoscope.

All modern endoscopes, cameras, regardless of their technical features and costs, can be divided into two groups

• USB-endoscopes, they broadcast the picture with the camera on the laptop monitor
• Video endoscopes with a single screen to display pictures

There are also analog optical endoscopes however are not intended to display the image on the screen or laptop and save the photo or video, so we will not consider them.

As mentioned above, the auto-service business gained the greatest popularity is USB video endoscopes. The reasons are many. They are all logical and understandable:

• The image on the computer screen in any case, will have higher resolution and more clarity than the display screen of the endoscope
• Having a separate screen further enhances the price set
• USB borescope camera can be used for storing recorded photos and videos computer storage, while memory kit with limited screen size SD-card (if this function is provided at all in a particular model)
• USB endoscope is powered by the computer and can run indefinitely

How to Select a Heat Gun

Heat gun need to heat a certain volume of space, and thus, the selection of this device primarily depends on where it will be used and what temperature it is necessary to maintain. Heat gun is capable of quickly and uniformly heat the air in the room with the help of convective heat transfer. High performance makes the heat gun is very popular. Every second of the work she draws a large amount of air, heats it with a metal or ceramic spiral rolls and back into the room. This heat gun burn oxygen, so the room where the work is a device that requires a constant supply of fresh air.

There are three types of heat guns - electric, gas and diesel. Comments and opinions about them can be very different. BTW, you can select the sound card sale at Banggood. Besides, you can easily get other electrical accessories (e.g. low voltage meter) there with high quality and reasonable prices.

Electric heat gun

Electric heat gun (e.g. 2000W heat gun) is easy to use and often has little power, often these guns are not used for production facilities, and for apartments, offices, small garages, because they take up little space and do not require special permits to connect. Such small cannon sometimes called fan heaters. The more powerful electrical device requires three-phase electrical network. Additional wiring of such a network requires special permits and additional costs, so it is usually convenient to take two low-power electric guns instead of one powerful. Thermal guns are equipped with power control, that is, you can always control the flow of heat from your heater.

Gas heat guns

Gas remains the cheapest fuel, of course, if it is brought to the building, where you spend working, therefore, using gas heat gun, you can save considerably, especially since gas is cheaper electric. Guns that run from the gas pipeline, of course, are much more economical, but before you buy them, you need to be sure that gather all the necessary documents for the connection of gas services. Gas gun burns particularly large amounts of oxygen, their use in enclosed areas dangerous.

Diesel heat gun

The most powerful are the diesel heat gun. Their disadvantage is a fairly high price of fuel and the need to create the conditions for the removal of gases that are formed during combustion. Diesel electric gun is safer and particularly gas, in them is always automatic, which does not allow them to overheat.

Marking Tape and Its Applications

Application of reflective film tape as contour markings for truck - the question is not as easy as it may seem at first. Originally Russian "maybe" and the principle of "stuck and drove off" can be used only when you are ready to be marked on the car every 3-4 weeks. If you are shopping for the tape transport markings, relying on the manufacturer claimed the life of the goods you need to thoroughly prepare for the application of adhesive markings on commercial vehicles. In this article we would like to in the consolidated form to highlight the main features, the nuances, the stages of the application and operation realized by us marking tape for heavy vehicles, thus freeing you from a long "gathering nuggets" of information from various sources.

Details of types and methods of applying the reflective film tape can be found in the section of our website called marking tape for whiteboards. As you can see from the above in the above section schematic contour marking options of accommodation, you have the opportunity to choose the modalities of placement of reflective materials on the surface of your vehicle. In particular, it can paste over the surface of your wagon or truck reflective markings in the form of a continuous and a dashed line around the perimeters of both side and rear side of the vehicle and the bottom edge only. In any case, the choice of applying the option rests solely on your shoulders. However, be sure to remember that in the event that the application of contour marking in the form of broken lines, you will need to take into account that the reflective contour markings shall occupy not less than 80% of the length, height and width of the vehicle. 

In addition, the application of adhesive labeling freight transport in the form of broken lines invariably complicates step of calculating and applying the markup for future contour marking your truck, although, of course, a way of placing a contour tape will allow you to saving on the amount of reflective tape. BTW, you can select the whiteboard marking tape at Banggood. Besides, you can easily get other electrical accessories (e.g. socket head cap screw assortment) there with high quality and reasonable prices.

How to Make Your Own Wooden Furniture

An essential element of any home - properly selected interior that will create comfort and coziness. But none of the interior will do without furniture. Built-in, cabinet or soft, made of wood or chipboard - modern furniture selection is very large. But if you value the uniqueness and individual approach, and at the same time want to save money - try to make wooden furniture themselves.

Woodworking - it's not as difficult as it might seem at first glance. To make the table, not necessarily have to be a carpenter or cabinetmaker. Alternatively, you can restore the old furniture, but this requires some knowledge.

Make furniture with their hands quite simple, especially if it is a question about the restoration of finished furniture. Starting work, take care of the presence of the main tools. You will need a drill, dremel router bits, hammer, saw, screws, nails, measuring tape and a sketch. So, to begin to restore old furniture is to be a detailed examination of all the elements. Maximum disassemble a table or cabinet, which will be restored and carefully examine every detail, paying particular attention to the side-bar.

Very often, the tree of some parts may be damaged. Dents, scratches, chips and other imperfections give the furniture a sloppy and shabby appearance, so they should be removed in any way you can. Do not forget about the possible contamination. And also pay attention to the old coating. If it peels off and falls away, be sure to walk on the surface of the abrasive cloth. Furniture repair will not be qualitative, if you leave anywhere fragile connection parts with each other. Therefore, carefully inspect all fasteners and where necessary, restore the strength of the drawer side. To do this, unplug the loosely coupled components and re-merge with each other, using carpenter's glue. Alternatively, instead of wood glue or screws can be used to glue wooden wedges. If the attachment is not subject to restoration and requires complete replacement, is not worth saving. Then furniture will last longer. BTW, you can select the woodworking tools (e.g. router bit dremel, etc.) at Banggood for high quality and reasonable prices.

Drills for Metal for Our Daily Use

In drills for metal sometimes embodied invisible to the eye but ingenious solutions that greatly simplify the work and extend the life of equipment. Let’s learn these features in detail. 

Twist drill is the most common type. When we say "drill for metal," we mean in the first place it. They are found in a variety of flavors: thick and thin, cheap and branded, simple and advanced (with a number of improvements). Buy a suitable set of drill bits for metal today is not a problem. And accessories like universal - that is successfully working not only with a variety of steel, cast iron, non-ferrous metals, but also wood, plastic. What made twist drills? They are made of high-speed steel. Therefore, the designation HSS (High-speed steel) in the specification of such equipment is a common occurrence. High speed steel has high red hardness, i.e. retains hardness at extreme heat, and this quality is important for the drilling of metal, because the drill temperature during operation is very high. There are also denote HSS-G (grinding treatment means), HSS-E, HSS- Co (Cobalt content), HSS-R and others. BTW, you can select the HSS hole saws (e.g. 26mm hole saw, 200mm hole saw) at Banggood for high quality and reasonable prices.

The drill for metal usually has a cone shaped tip with two cutting edges, which converge at an angle rather flat (118-135 degrees). Often you can see tip center and the so-called double sharpening, when both of the cutting edges remove an additional facet. Such sharpening reduces friction, which reduces ceteris paribus promotes heating and drilling with less effort.

How to Select the Hole Punch for Home Use

Yes, that's right - punch. This is the purpose of this toolkit. Of course, it is possible for these cases to keep to your awl or scissors, but they do not perfectly aligned holes with smooth edges. Ultimately, the output will be kept in the hands of the product is very far from perfect.

Types and forms of punch skin have a lot of. The most primitive - it is sharpened on one side in the form of a cone tube. Some craftsmen made independently of such punches sleeves. Using them is simple: put a blank leather sharpened end and flipped on top of a hammer. The hole is ready. It should only get the hand to keep tube vertically and hammer impact not mow the side. Avid craftsmen capable of, in addition to simple round punch, to make some curly much more - in the form of hearts, flowers, diamond shapes, stars. But you never know what will come to mind fantasy real creator. Punch skin needs not only and not so much for decorating products, although curly perforation, of course, looks just amazing. It is indispensable for making holes for braiding, hand-stitched. They make holes for fastener or in order to be able to insert the eyelets, eyelets, rivets plant.

Buying a punch to the skin, give preference to products made ​​of durable tempered steel. It is better to pay a little more money, but to get the equipment that will not fail. Soft metal crumple quickly and will become worthless. Also, pay attention to the acuteness of sharpening chisels. Ask acquiring turret design, whether removable head. And do not be afraid to accumulate too many different punches. Sooner or later you are bound to take advantage of each of them. BTW, you can select the hole punches (e.g. 3mm hole punch) at Banggood. Besides, you can easily get other tools (e.g. 50mm hole saw) there with high quality and reasonable prices.

How to Correctly Drill Ceramic Tile

Repairs are often necessary to make a hole in ceramic tile. This situation occurs if you need to adjust the kitchen cabinet mounted or add to the bathroom towel rail. The difficulty lies in the fact that the fragile tiles may crack when drilling and replace a spoiled tile - it is very troublesome. How correctly drill ceramic tile?

You will need

Masking tape (duct tape or adhesive film), electrical drill bit, drill for tile, drill with carbide tip, paper, vacuum cleaner. BTW, you can select the drill tools (e.g. electrical drill bit, hand twist drill) at Banggood with high quality and reasonable prices.

In order to properly and carefully make a hole in ceramic tile, you will need masking tape (suitable piece of tape or adhesive film), electric drill, drill for tile, drill with carbide tip, a sheet of paper, vacuum cleaner. Stick to the place where the future should be located hole, square piece of masking tape. In its absence is quite suitable adhesive tape, adhesive tape, adhesive tape, or colored paper. Put in the right place on the stuck piece of masking tape mark. Use a felt-tip pen for marking. The label will mean drilling site, it must be clearly visible.

Prepare an electric drill. It should be adjustable speed. Insert drill special drill bit, used for drilling tiles and glass. This drill has a spear-shaped tip made of tungsten carbide. Disconnect an electric shock mode. Attach the drill tip to the mark and start drilling at a very low speed made you. It is important that the number of revolutions of the drill was initially low, from this depends on the integrity of the tile. It will serve you in good stead a piece of masking tape stuck - it will not slide drill with drilling point. As you go through the drill ceramic drill increase the number of revolutions.

Thus, the tile is drilled. Now you can replace the drill bit to the one suitable for your wall. Typically, the drill is used with a carbide-tipped, designed for drilling stone and concrete. If the tiles are located under the tree, select the appropriate electric drill bit.

How to Repair a Soldering Iron

The soldering iron is needed in any economy. It is used for repair of electrical devices, and to interconnect a variety of metal parts. If the soldering iron is out of order, not always necessary to buy a new one. Sometimes it is enough to repair it, recover. Most often fix involves replacing the heating element.

You will need

- Ceramic resistance SEW-10;

- Asbestos yarn;

- Pliers;

- A sharp knife;

- Quick Splice Wire Connector.

For example, it suffices to consider the sequence of actions in the repair of 60W Soldering Iron, rated at 220 V. To replace a faulty heating element, prepare ceramic resistance type SEW-10 rated from 1.0 to 1.5 kW. The hole, located in the center of the resistor, has a diameter which is easy soldering tip is included, with additional adjustment is required.

Remove the old blown heating element. On the case on the part of the longitudinal seam, do cross-propyl about the middle. Step back from the edge by 40 mm. Now expand the propylene side of the tube and cut off the corners of the formed socket. This is required in order to avoid contact with the resistance body pin Resistance, which will serve as a heating element, insert into the slot. Bend the body petals surrounding them nest and secure with clamp.

Now you need to connect to the updated heating element power cord. Cut with an electrical cord around 150-200 mm of insulation. Typically, a standard cable is double-insulated conductors, which must be removed. Freed ends of the wire over the entire length tightly wrap the thread of asbestos - turn to turn. This thread can be taken, for example, from a faulty heating pad. Isolated thread wire ends through the channels pull the handle and connect to the terminals of the new heating element. For the convenience of the resistor mounting legs bend, insert the inside of the pre-curved tip of the stripped wire and crimp pliers.

Security: IP-camera Against Analog Cameras

What are the main features of IP-cameras over conventional analog why they are more expensive and in any case it is necessary to spend more on IP, and in what you can do without them. You ever seen a crime drama or TV show where police shot a bunch of footage considering CCTV cameras and suddenly one of them says: "Wait! Focus on this guy! Click to enlarge the image! "And then, suddenly, miraculously, grainy and blurry images are crystal clear and give a perfect picture of the criminal! They identify a criminal, caught it, and the case is closed.

Well, it is common to fiction. In fact, the grainy footage obtained analog security camera, with an increase in scale and approach only become even more blurred and grainy. But all is not lost! We live in a time when IP-cameras are no longer a novelty and become common place. Now you can forget about the poor quality images from security cameras that we used to see when using analog cameras video surveillance systems. BTW, you can select the security camera (e.g. wireless AV camera) at Banggood for high quality and reasonable prices.

Nevertheless, we should not forget the price. So you have to ask yourself: "Do I really need is a system of IP-based cameras?" Next, we look at the advantages and disadvantages of a particular type of cells:

IP stands for Internet Protocol. This concept relates generally to digital cameras that can send and receive data via a computer network, rather than sending them to channel digital video recorder (DVR).

The best analog surveillance cameras still cannot match even the worst models of IP-based cameras, when it comes to image quality. In addition, IP cameras (e.g. ESCAM QF200) capture a much wider range of image. If we compare it with the analog camera, it will mean that one IP camera can replace the work of three or four cameras "old-fashioned".

Banggood 10-Year Anniversary 48-Hour Crazy Sale, $500 OFF Coupon Is Waiting for You

In celebration of its 10-Year Anniversary this year, Banggood has been offering thousands of Lightning Deals to customers from around the world by running the large-scale promotion during the past month. And now, the climax is coming. The last massive 48-hour celebration will begin on Sept. 8th and end on Sept.10th. Following are the flash deals that will be available at the 48-Hour Crazy Sale: http://www.banggood.com/10annv.html

The 1st Crazy 24-Hour will begin at 10:00 AM (UTC+8 Beijing Time), Sept. 8th and end at 9:59 AM (UTC+8 Beijing Time), Sept. 9th. And you will get 5 surprising deals as following:

1st Surprise: 50% OFF Snap-Up

2nd Surprise: Under $10 Zone

3rd Surprise: Crazy Sale Begins (Super Low Price)

4th Surprise: $99 - $10 Coupon

5th Surprise: New Arrival on CUT Price Deals.

During the final 24 hours, you can enjoy the 10% off coupon on the all site products except for mobile phones and tablets. One customer can use only once. The Expiry Date is 9:59 AM (UTC+8 Beijing Time), Sept. 10th. In addition, there will be 4 rounds of flash sales, 6 hours for a round.

The 1st round is from 10:00:00 to 15:59:59 (UTC+8), Sept. 9th. And you can get the deals as following:

$99 Snap-Up

800 Gift Cards

Input order number to get $10 OFF Gift Card (Unlimited order amount)

More than 1000+ Category Sale (Super Low Price)

The 2nd round is from 16:00:00 to 21:59:59 (UTC+8), Sept. 9th. And you can get the deals as following:

$9.9 Snap-Up

$9.9 App Only

$9.9 Zone

The 3rd round is from 22:00:00 (UTC+8), Sept. 9th to 03:59:59 (UTC+8), Sept. 10th. And you can get the deals as following:

$0.99 Snap-Up

$0 Gift Exchange

$0.99 Zone

Last Chance to Cut Down At $10

The final round is from 04:00:00-09:59:59 (UTC+8), Sept. 10th. And you can get the deals as following:

$0.10 Snap-Up

10000 BG Points for Customer who make the Highest Order

Get $10 OFF Coupon for Reback Sale

Following are some examples of Electronics top deals that will be available at the 48-Hour Crazy Sale.

Programmable Power Supply, $21.99

Arduino UNO Starter Kit, $19.99

JYE Tech DSO138, $16.19

Most importantly, surprising prizes ($500 off coupon, 300 off coupon, and 200 off coupon) will be given to the top 3 orders with the greatest value. All paid orders placed between Sept 8th 10:00 AM and Sept 10th 10:00 AM UTC+8 will be automatically entered. Winners will be announced on the page and will also be contacted via email on Sept 12th. Wish you good luck and a wonderful shopping! For more details, you can check on this page: http://www.banggood.com/10annv.html.

Banggood Comes to the Time Square & Gives an Announcement About Its 10-Year Anniversary Celebration

Among the past one month, Banggood has been celebrating its 10-Year Anniversary by running a large-scale promotion sale. Thousands of attractive deals have been appearing on this massive feast. And the 10-Year Anniversary carnival is going on. There are still lots of fascinating products sold at amazing lower prices on Banggood at the moment, and will be, of course, among the last 48 hours, 8th to 9th Sept.

In order to let more people know the good news, Banggood comes to the Time Square and give an announcement about the “EPIC SALE” between the 8th and 9th Sept. on the billboard. Banggood just wants to tell the world, “With Banggood, the more you spend, the more you save.” As you can see, Banggood hammers at providing more and more cost-effective Chinese products to customers from all over the world.

The “EPIC SALE” is just around the corner. No matter if you have heard of Banggood ever before, it’s time for you to know and get the best bang for your buck! Wish you good luck and a wonderful shopping feast.

How to Choose a Good MP3 Payer

MP3 Player - incredibly interesting, convenient and useful device that allows you to listen to your favorite music anywhere and anytime. It would seem that in the selection of MP3 player is no big deal, because all that is required from it - it is qualitatively reproduces sound. However, the huge variety of different models of MP3 players, represented on the shelves of modern shops could make anyone confused.

If the MP3 player you need only to dry your favorite music, stop your choice on a very simple device that supports playback of MP3 files and equipped with built-in radio player. These models usually have a compact size, long work without recharging, and understand the principle of action can even totally versed in the art people.

Most popular among today's music lovers deserve MP3 players that can, in addition to its primary function, to carry out more and many other interesting and useful things.  One of the most convenient additions to the current MP3 player is the display. Simpler and cheaper models have, as a rule, small monochrome screens that allow to observing the precedence of reproduced music files and battery charge, and select the desired song. More expensive models of MP3 players have a color display with high resolution, which allows you to not only monitor the reproducible MP3 files, but also view pictures, videos and even movies. And people always will get a good earphone (e.g. KZ ED9) for matching.

It is very useful function MP3 player (e.g. RuiZu X02) is considered to be an opportunity for it the memory card connectivity, the ability to expand significantly opportunities device and upload it to a lot of new files. It is important when choosing an MP3 player and decides the type of food. There are only two types of MP3 players: those who work on AA batteries, and rechargeable. The first does not need regular recharging. Grounded batteries in them are just enough to replace with new ones. The devices also running on the battery should be recharged from the mains as needed.

Where Is It Cheaper to Buy Solar Panels?

The increase in electricity tariffs raises questions about the need for alternative sources of it, which might fully or partially offset the cost. One such source is solar energy, which with the help of simple technical devices, can easily be converted into electricity. In the West, where the population has learned to count money for a long time, solar panels can be seen everywhere, even in countries that southern certainly not be called.

If you decide to contact the store, choose solar cells well-known manufacturers. Do not rush, talking with vendors, go back home and see the information about the manufacturer in the Internet. The larger the production the more its imports in Europe and the US, the more likely it is that the quality of the battery will be quite high. An additional advantage will be a big experience in the production and sales of high-tech equipment, confirmed by international certificates of quality and safety. In this case, you can rely on the manufacturer's warranty, ensuring flawless performance of batteries and maintaining a high efficiency for 10 years or more. 

If you want to save, you can buy low grade batteries, which have a few chips on the edges of the elements - the quality of the battery life is almost no impact, except on her appearance. If you live in the northern regions, where a lot of snow and frost can form on batteries, buy a model with a black frame and black as filling between the elements - so snow and ice will melt even at low angles of the panel tilt. BTW, you can select 18V Solar Panel at Banggood. Besides, you can easily get other electronic accessories (e.g. Tracking Robot Car) there with high quality and reasonable prices.

The undeniable advantage of solar panels is the possibility of their capacity, increasing the total area. Therefore, if today you cannot buy a sufficient number of high-quality and expensive batteries, maybe it makes sense to buy a smaller number, and then buy more, especially since the life of single crystal elements is up to 50 years.

How to Solder Copper Wires

The ability to solder can be very useful in repairing home appliances, as well as the restoration of the continuity of the cables for different purposes. However, this should not carelessly, as carefully and accurately, observing some simple rules.

Before proceeding directly to the case, select the optimum power soldering as for quality of the work performed must be properly warmed up all the elements to be soldered. Pick a suitable soldering tip. It must be comparable in size to the dimensions of the part itself, otherwise, you run the risk of any damage to neighboring cells or poor quality solder wire (circuit elements).

When using an electrical board of any soldering equipment must be grounded to avoid damage to the sensitive elements of the device circuitry from static electricity or voltage soldering iron power (220 V) in the case of an instrument failure. Getting Started, first clean the surface of the soldering tip and the wires to be soldered from contamination as the garbage crumbs, dust and oxide can greatly affect the quality and durability of the soldering. Then turn on the soldering iron to the mains supply and wait until it warms up to the melting point of tin. The more powerful will be your tool, the longer it will have to wait. Wires that you are going to solder, previously better carefully twist together as tin - soft and brittle metal. He will not sustain even weak loads.

After this dip soldering tip in rosin and grease them gain twist. By doing so, you will ensure good conditions for the flow on the tin soldering place. Then dip a thorn in the solder and attach it to the place of soldering. Hold the soldering iron should be pressed about 2-3 seconds. During this time, the molten tin will have time to flow onto the wire (circuit components) and how to impregnate all the micro cracks around. BTW, you can select the electric solder sucker at Banggood. Besides, you can easily get other electronic accessories (e.g. 6V Solar Charge Regulator) there with high quality and reasonable prices.