How to Connect an Ammeter

Despite the fact that the ammeter is considered an attribute vehicles produced a long time, this equipment still occurs as early generations of machines. Therefore, replace, repair, or make any other operation should be aware of how to connect an ammeter if necessary.

You will need the connecting wires and a DIY digital ammeter. Since the ammeter into the circuit is connected in series, locate the wires that connect the generator and battery. They must be careful to separate, without losing the value of the polarity of the wires.

As a rule, the generator and the battery are connected by wires of large cross section, so choose those to connect an ammeter should be the same diameter. Accordingly, it is necessary to connect the wires in order to connect the generator and an ammeter to the battery with the same. For this purpose, place them carefully and wrap the tape to avoid closure.

If you are using the ICL7107 ammeter, by and large polarity of the wires does not matter. But in the case of an analog device, be sure to note that negative of an ammeter is connected to the battery plus. BTW, you can select the digital ammeter at Banggood. Besides, you can easily get other electrical accessories (e.g. DIY voltmeter) there with high quality and reasonable prices.