The sound quality electric guitar is almost
entirely dependent on the audio equipment. It can be connected to an
amplifier or a computer, and attach it to various devices, which provide the
desired effects artist. First of all, you need to properly connect the
instrument to the amp, amplifier or computer.
You will need
- Guitar;
- Amp;
- Power;
- A computer;
- Effects pedal;
- Guitar processor;
- AUX to Jack adapter cable.
Amp is the number of devices installed in
one box. It has a pre-amplifier and power amplifier, audio processing
blocks and effects, tone-unit, control panel, sound system. It is very
convenient, and the executor can only connect a miracle device with his
instrument. As a general rule, wire assembly "AUX to Jack 'is sold
with a guitar. It can be purchased separately or solder. Find the
guitar output jack Output, and amp - Input. Connect the wires and connect
them to power amp. If you are going to use a processor or guitar effects
pedals, connect them between a guitar and a guitar combo. Input and output
jacks should always be labeled. Output jack to connect a guitar to the
Input pedal or processor, and their Output - to the input of amp. For home
rehearsals enough amp power of 15 - 20 watts.
To connect a line amplifier can be used as
a computer or speaker. The connection is the same as in the first case. The
main thing - do not mix up the nest. When connecting to the line just
attach the pedal or processor. It is possible between the guitar and the
amplifier to connect the mixer. It allows you to adjust the power and
timbre of different instruments. Guitar output is connected to the mixer
input, the output of the mixer - to the input of the amplifier.
When you connect an electric guitar to the
computer plays the role of the main amplifier sound card. It is possible
that you need an adapter as guitar jack likely 2.5mm female jack and the computer can be 6 mm. When you connect an
electric guitar does not matter which one to use adapter - mono or stereo.
没有评论:
发表评论