How to Make a Peristaltic Pump with Your Hands?

The first step is to choose the correct tube. Although if the purity special value of the pumped liquid is not for you, then there is not all that bad. But do not forget that the performance depends on the internal diameter of the hose. Hoses can be made continuously or fixtures that allow them to capture still.

Then you can collect a peristaltic pump with your hands. We use the required diameter rollers, which have to buy in the store. Are driven by their best with the help of an electric motor via a shaft or belt drive. Around the rollers stretch the tubing and assemble the whole thing in the case. One end of the hose is placed in a container from which the liquid is drawn, and the second - at the destination. Note that while the rollers are evenly dosed liquid, of course, if it's important. In principle, nothing complicated. The main thing to build a high-quality aquarium peristaltic pump that will meet their performance. The electric motor can be used as a low-power motor. Here it is essential to take into account the diameter of the tube.

Like any other pumps, this kit comes. Usually, there is a special passport, which indicated grade. There are specified and specifications. If you are going to buy a 12V DC peristaltic pump, then pay attention to parameters such as the type of impeller and the number of rollers. We've already figured out that the more clips the better, but the equipment is expensive because of its complexity.

What matters is the type and diameter of the hose. Scope of material depends on the diameter and - performance. After all, there is such parameter as power. It is in many cases the main and determines the effectiveness of the equipment as a whole. To ensure a more comfortable use of these pumps you can buy additional components. If you are going to pump in his studio, set the control of the rotor speed. This will control the speed of rotation of the rollers, and hence the productivity.