How to Embroider Cable

Cables to connect computers to routers and switches often have to make by ourselves. Soldering is not applied. Embroider cable conductors installed in the connector, after which they are swaged.

You will need

- Cable or UTP KSSPV desired length;

- Clippers;

- Two RJ-45 connector types;

- Spiral wire wrap;

- A special tool to crimp connectors.

Get the special tool to crimp the RJ-45 type connectors. When buying, make sure that it is designed specifically for these connectors. Without him to carry out this operation, you cannot. Conventional pliers and other means at hand to implement it will not work. BTW, you can select the tools at Banggood. Besides, you can easily get other electrical accessories (e.g. Samsung ST65 USB cable) there with high quality and reasonable prices.

Pick up the end of the cable. Carefully remove the skin from it. With the wire insulation itself does not remove as special miniature knives, which, when broken down in to carry out this operation automatically located inside the connector. Turn the connector lever for pulling down gold-plated contacts on my own. The first output is on the left。 If you need a cable to connect your computer to a network switch, hub or router, the connectors on both ends of the cord is embroidered in the same way:

1 - Orange and white;

2 - Orange;

3 - Green and white;

4 - Blue;

5 - Blue and white;

6 - Green;

7 - Brown and white;

8 - Brown.

If you need to connect with each other or two computers or two any network device (router, switch, hub), collect the "crossover" type cable. To make it, one of the plug connectors is in the same manner as in the previous case. The second connector, connect as follows:

1 - Green-white;

2 - Green;

3 - Orange and white;

4 - Blue;

5 - Blue and white;

6 - Orange;

7 - Brown and white;

8 - Brown.

Insert the connector into the crimp tool. The ribbed side of the connector next to the gold contacts at the same time must deal with the surface of the working part of the tool, which has the same shape. Gently squeeze the tool until it clicks. Do not apply to him with excessive force. Then take ohmmeter (or any multi-function measuring instrument, working in an ohmmeter mode) and to each of its probes connect on pin. Rang the cable, and then start using it.